
Driveway Cleaning Sydney
Your driveway should look
this good again.
Professional high-pressure driveway cleaning across Sydney. Concrete, pavers, exposed aggregate and brick paving — restored to like-new condition. Fixed price. 100% guaranteed.
○ Fixed-Price Quotes ○ Same-Week Availability ○ Fully Insured ○ 100% Satisfaction Guarantee




THE REAL PROBLEM
Here's what's actually on your driveway
🚗 Oil, Grease & Rubber
Driveways collect years of engine oil drips, tyre rubber burns, and grease from parked cars. These don't wash off with a garden hose — they bond into the surface and get darker and more embedded over time.
Without the right pre-treatment and pressure technique, you're just moving the problem around.
✅ Here's how we remove it — permanently
We pre-treat with commercial-grade degreasers calibrated to your surface type, then apply controlled high-pressure cleaning at the exact PSI needed for your driveway material. The result isn't just clean — it's restored.
We also remove mould, algae, lichen, chewing gum, paint overspray, and general grime. One visit. Done properly.


Before & After — Concrete Driveway, Western Sydney
THE REAL PROBLEM
WHAT WE CLEAN
Every driveway surface. One team.
We adjust pressure, technique, and treatment solution for each surface type — not a one-size-fits-all approach.

CONCRETE
The most common driveway surface in Sydney. Handles high pressure well. We pre-treat oil stains and rubber marks before the main clean.

EXPOSED AGGREGATE
Requires lower pressure to protect the stone surface. We use specialised rotating heads to clean deep into the textured finish without blasting out aggregate.

PAVERS
Concrete, clay, or natural stone — each cleaned at the right pressure to protect joints and surface finish. Re-sanding and sealing available as add-ons.

ASPHALT
Asphalt is pressure-sensitive. We use controlled, lower-PSI technique to remove surface build-up without damaging the binder or surface integrity.

BRICK PAVING
Brick pavers are cleaned using techniques aligned with our Think Brick accreditation — protecting the surface while removing mould, moss, algae and efflorescence.
OUR WORK
Results speak louder than promises.
Real before-and-after results from driveway cleans across Sydney. Client photography — no stock images, no filters.
HOW WE WORK
Our 4-step driveway clean process
Every job follows the same proven process — no shortcuts, no rushing through to the next job.
1
2
3
4
ASSESSMENT
We inspect the surface type, identify stain types (oil, mould, algae, rubber), and determine the right pressure, technique, and pre-treatment for your specific driveway.
PRE-TREATMENT
Commercial-grade degreasers and surface-safe solutions are applied to break down oil, grease, algae and organic growth before high-pressure cleaning begins.
HIGH-PRESSURE CLEAN
We work systematically across the entire surface, adjusting pressure settings for different zones. Rotary surface cleaners leave an even finish with no streaking.
OPTIONAL: SEAL
The best time to seal is immediately after cleaning — the surface is already open and prepared. We can apply a professional-grade concrete or paver sealer on the same day.
💡 Lock in your results with concrete sealing
A freshly cleaned driveway is the perfect time to seal. The surface is open, clean, and ready to absorb the sealer properly — which means better protection, longer-lasting results, and a lot less effort to keep it clean going forward.
RESISTS FUTURE STAINING
REDUCES ONGOING MAINTENANCE
ENHANCES SURFACE COLOUR & FINISH
AVAILABLE SAME DAY AS CLEAN
WHAT OUR CLIENTS SAY
Trusted by Sydney homeowners
"The difference is absolutely incredible. Our concrete driveway had years of oil stains and tyre marks — I thought they were permanent. The team turned up on time, explained exactly what they were doing, and left the driveway looking brand new. Couldn't recommend them more highly."
