How much does driveway cleaning cost in Sydney?

Driveway cleaning in Sydney typically costs between $150 and $500 for a standard residential driveway, depending on size, surface type, and level of staining. We provide fixed-price quotes after assessing your driveway — call 0433 199 992 or request a quote online and we'll come back to you within 24 hours.

Can you remove oil stains from a concrete driveway?

Yes. Oil stains on concrete are one of the most common requests we get. We apply a degreaser pre-treatment to break down the oil before pressure cleaning — which lifts the stain from the pores of the concrete rather than just cleaning the surface. Results depend on how long the stain has been there and how deep it has penetrated, but in most cases there is a significant improvement.

How long does driveway cleaning take?

A standard single-car residential driveway takes 45 minutes to 1.5 hours. A double-car driveway or larger area takes 2-3 hours. If you're adding a path, patio, or concrete sealing to the scope, allow additional time. We'll give you a realistic timeframe when we quote.

Should I seal my driveway after pressure cleaning?

Sealing is strongly recommended after cleaning, particularly for concrete and paver driveways. The cleaning process opens up the surface pores — sealing immediately after gives you maximum penetration and the best long-term protection against staining and re-growth. We offer same-day sealing at a combined fixed price.

How much does driveway cleaning cost in Sydney?

Driveway cleaning in Sydney typically costs between $150 and $450 depending on the size of the driveway, the surface type, and how heavily soiled it is. We provide fixed-price, no-obligation quotes before any work begins — no surprises. Call 0433 199 992 or submit a quote request for your property.

How often should I clean my driveway?

For most Sydney homes, once every 12 to 18 months is enough to keep your driveway looking clean and to prevent permanent staining. Driveways in shaded areas prone to mould, algae, or moss growth may benefit from an annual clean. We'll advise you on the right maintenance schedule after the job.

Will pressure cleaning damage my pavers or exposed aggregate?

Not when done correctly. Our technicians adjust pressure settings for each surface type. Concrete handles high pressure well; pavers and exposed aggregate need a lower, more controlled approach to avoid surface damage, sand joint erosion, or aggregate loss. We use professional-grade equipment calibrated to each surface — not a one-pressure-fits-all approach.

How long does a driveway clean take?

Most residential driveways take between 1 and 3 hours. A standard single-car concrete driveway is usually done in 60 to 90 minutes. Larger driveways, those with heavy staining, or those receiving a post-clean seal will take longer. We'll give you a realistic time estimate when we quote.

Can you remove oil stains from a concrete driveway?

Yes, in most cases. Fresh oil stains respond very well to our pre-treatment process, which uses a commercial-grade degreaser applied before high-pressure cleaning. Old or deeply set oil stains may lighten significantly but not disappear entirely. We'll be upfront about what to expect before we start.

Do you offer concrete sealing after driveway cleaning?

Yes. Sealing immediately after cleaning is the best possible time — the surface is clean, open, and prepared to absorb the sealer properly. We offer professional concrete and paver sealing as an add-on to any driveway clean.

Driveway Cleaning Sydney | The Pressure Cleaning Co

Driveway Cleaning in Sydney Single image only please landscape.jpg

Driveway Cleaning Sydney

Remove Stains, Grime & Algae for Good

Your driveway takes more punishment than any other surface around your home. Oil drips, tyre marks, algae growth, built-up grime — over time, a concrete or paved driveway can go from looking sharp to looking neglected. The difference between a clean driveway and a stained one is visible from the street.
The Pressure Cleaning Co provides professional driveway cleaning across Greater Sydney — using industrial-grade pressure cleaning equipment and surface-specific technique to remove stains that garden hoses and DIY pressure washers simply can't touch

Our Specialised Service

What We Remove From Your Driveway

Most driveway stains are stubborn because they've had time to penetrate the surface. We treat and remove:

● Oil and grease stains — the most common driveway problem, particularly on concrete

● Tyre marks and rubber scuffing from regular vehicle use

● Algae, mould, and lichen growth — especially in shaded or south-facing driveways

● General grime, dirt, and pollution buildup

● Rust staining from metal furniture or fixings

● Paint or mortar splatter from previous building or renovation work

Your Need to Know

Driveway Surface Types We Clean

Every driveway surface requires a slightly different approach. We clean all standard residential and commercial driveway types:

GET A FREE QUOTE

Longer-Lasting Result

Add Concrete Sealing

A clean driveway looks great. A sealed driveway stays cleaner for longer. After pressure cleaning, the pores of your concrete or pavers are open — the ideal moment to apply a commercial-grade sealer that locks out oil, water, and organic growth.
We offer same-day concrete sealing as an add-on to any driveway clean. Ask for a combined quote when you enquire.

GET A FREE QUOTE